Sports Planes

The Amp Master
By By Al Eastman nstn1183@fox.nstn.ca

Amp_jr.dxf  32kb

Al has provided a text file to assist in the model's construction. Click here to read.

There is also an article in E-Zone for this plan, Click Here to go there.

Big Brother (Speed 600 Pusher Prop Model)
By Phillipe Teacher

Bigbro.dxf 61kb

Eastwind II
By Al Eastman nstn1183@fox.nstn.ca

EastwindII.dxf  40kb

Al has provided a text file to tell you about his model. Click Here to read.

Ultimate Bipe
By Dan Marlowe by-tor@jaxnet.com

ULT40.dxf 2kb

Sport 400 (Nice Little Speed 400 Model)
Mark M Jenks

Sport 400.dxf 31kb

Mark has provided a construction text file for this one. Click Here to view.

Cherokee 140 Profile Flyer (Geared Speed 600 Model) 
by Guy Fuller

Cherokee.dxf 66kb

Flying Wing (Speed 600) 
by Dennis Tapsfield

FlyingWing.gif 534kb Suits an 8 x 4 fixed prop, save weight using BEC and mini RC gear.

Bubbles (Suit Astro 15G) 
by David Theunissen

Bubbles.dxf 118kb ROG performance, symmetrical airfoil. Built up wing. File has been modified to slightly fix merged text boxes. Details now readable.

Mega Peper (Geared Speed 400 6V, 7 x 500/600mah, 2 channel)  
by Dave Robelen

Megapepper.gif 367kb Potential ROG model. Nice level of plan detail. 44" wingspan and a flying weight of around 17 ounces. Should fly very well with a very low wing loading. Lightly built up main wing, and balsa sheet tail.

Electric J (Geared 3:1 Speed 400 6V, 7 x 500/600mah, 2 channel)  
by A J. Jusko

Electric J.dwg 26kb 48 inch wingspan light weight flyer. Primarily balsa stick construction.

Combat Spitfire (Potential Speed 600, 7/8 x 1700mah, 2 channel)  
by Pierpaolo Pastorino

Spit_A0.dxf 414kb The model is currently configured for IC power, however, minor alterations to the motor mount area would then allow the fitting of a Speed 600 motor. The wing span should be adjusted to about 48". Plan has all detail required and should not be a long project to complete. If you cannot read the Italian descriptions in the plan just click on the below link and the AltaVista Translation page will come up for you:
Click Here to Go to the Translation Page 

Sea Master Water Plane (Requires .40 IC motor or equivalent electric power system, flying weight with IC 5.5lbs)  
by Ken Willard

Seamaster.dxf 352kb Model originally design for IC. The motor is secured via a power pod that is connected to the fuselage. The pod also houses the fuel tank. A large amount of information is contained on the plan and takes some time to investigate all aspects. 

Autogiro (IC .35/.46 motor, rudder/ elevator)
by Hall de Bolts

autogiro.gif 46kb This gif plan is quite poor in viewing quality, but because it is a fairly unique style of model it has been included. Plan is sufficiently clear to identify all components. CG is on the wing spar. Good luck!

F117A Stealth Fighter (designed of IC.40-.46, elevon control)
by Steve Teerunck

F117a.gif 462kb This two page gif plan is very clear in viewing quality. Have not seen the finished model, but the plan seems to give a very realistic profile all round. The engine on the front is a little crude, but in flight would look good. This would also be an excellent model for a slope soarer project.

This page was last updated on Tuesday June 26, 2001.